Hot Draft Beverage Dispenser Installation Ideas
There Are Unlimited Ways to Install our Hot Draft Beverage Dispensers
Our D-Series of hot draft beverage dispensers have been deployed in many different ways and many different places. This page will give you an idea of how our some of our customers have had us install their dispensers. If you have an idea that we may be able to help with - give us a call!
Standard Counter Top Placement
Hot draft beverage dispenser is placed on counter top with supply lines coming up from the cooler through a hole in the counter top. Gas supply is either in the cooler or in a remote location.
- D-Series Hot Draft Beverage Dispenser
- Counter Height Cooler
- Gas Supply
- Korny Kegs, Cambros, or Bag in Box
Portable Cooler Top Placement
Hot draft beverage dispenser is placed on portable cooler with supply lines coming up from the cooler through a hole in the counter top. Gas supply is usually in the cooler. Can be rolled from point to point as long as there is sufficient electrical power to operate.
- D-Series Hot Draft Beverage Dispenser
- 1,2, or 3 Door Portable Cooler or Kiosk
- Gas Supply
- Korny Kegs, Cambros, or Bag in Box
Behind a Wall Placement
Hot draft beverage dispenser is on the backside of wall and connected to wall mounted beer tower on frontside of all. Standard faucets are replaced with whips that are then connected to beer towel. Dispenser controls are placed on backside of units for ease of access
- D-Series Hot Draft Beverage Dispenser with Reversed Controls
- Counter Height Cooler behind wall
- Wall Mounted Beer Tower
- Korny Kegs, Cambros, or Bag in Box
Under Counter Placement - Complex
In this setup, hot draft beverage dispensers are placed on a shelf beneath the counter with the faucet whips connected to Cobra towers on the counter above. Product is transported through a glycol-chilled supply line from walk-in cooler in the back of the store.
- D-Series Hot Draft Beverage Dispenser
- Beer Towers
- Glycol Chiller / Chilled Supply Line
- Remote Cooler
Under Counter Placement - Simple
Hot draft beverage dispenser is placed in an open drawer just below the counter top. It's out of customer sight and doesn't disrupt the work flow of your team. Drawer recommended to have easy access for dispenser maintenance.
- D-Series Hot Draft Beverage Dispenser
- Open Drawer Below Counter
- Gas Supply
- Korny Kegs or Modified Cambro
Hot Chocolate Milk Trailer Installation
In this setup, hot draft beverage dispensers are placed inside a towable trailer. A portable air compressor or CO2 tank is used to activate pumps to pull product from Bag in Boxes. Dispensers can be power by onboard generator or plugging into on-site power supply.
- D-Series Hot Draft Beverage Dispenser
- Gas Supply – Portable Air Compressor or CO2 Tank
- On-Board Generator or Plug into On-Site Power Supply
Food Truck Installation
Hot draft beverage dispenser with reversed controls is placed so that faucets are positioned on the outside of the truck for customer self serve. A small 360 nitrogen generator is used to supply nitrogen for charging and pushing the coffee kegs.
- Custom 5 Faucet (2 Hot 3 Cold) D-Series Hot Draft Beverage Dispenser
- 360 Nitrogen Generator
- Korny Kegs
Interested? Let's get in touch!
We can help bring your big hot beverage idea to life. Let your creativity loose and start serving the next hot thing!