D200 – Medium Volume Heated Draft Dispenser
Hot Dispensers for Retail, Commercial Kitchens and other Medium Volume Markets
Dispensing Speed – 80 ounces a minute
D200 Overview
Built for with the retailer in mind. Designed to be reliable in spaces that may see temporary spikes in activities throughout the day
- 80 Ounces of hot draft beverages a minute
- Provides consistent taste and temperature from beginning to end of your event
- Requires 208/220VAC 20 Amp electrical service
- Utilizes an L6-20 Twist Lock electrical plug
About the D200
The D300 – high volume heated dispensing system is portable, easy to clean and use, and can dispense 6 -16-ounce tumblers of delicious hot gourmet beverages per minute. Our patented FloHot technology means you never have to worry about your product being scorched or having a burnt taste.
The D300 uses pressurized gas to draw beverages from bulk containers (such as Bag in Boxes, kegs or soda tanks), through the FloHot heating system and out the faucet. Though CO2 is most commonly used, the dispenser can easily accomodate compressed air from either a tank or compresser in place of CO2. Nitrogen can also be used when serving beverages that are sensative to oxegen exposure.
Unlike other hot beverage dispensers, we don’t have to trade quality for speed. The D300 continually dispenses hot beverages at the same flow rate as today’s fastest beer taps. All of our D-Series Dispensers are available in multiple faucet configurations to include multiple hot and cold faucets so you’re covered in all seasons.
How the D-Series of Heated Dispensers Work
Cold = Freshness
Dispenser is placed on a counter or refrigerator. Keg or Bag in Box is stored in refrigerator to maintain optimal quality and preserve your product.
Hooking Up
The draft beverage line hooks up to the back of the hot tap dispenser. If you're using product from a Bag-in-Box, a pump will be needed to pull product from bag. We supply everything you need!
Pull the Handle
As you serve from the hot tap, the liquid flows through the dispenser and is heated on-the-fly to your desired temperature which is set on the digital thermostat.
D200 Specifications
| Dispensing Speed | 80 Ounces (2.36 liters) per minute |
|---|---|
| Dispensing Temperature (hot faucet) | Up to 180 degrees (F) / 82.2 degrees (C) |
| Dispensing Temperature (cold faucet) | Down to 36 degrees (F) / 2.2 degrees (C) - dependent on refrigerator temperature |
| Watts | 3800 Watts |
| Voltage | 208/220 VAC |
| Amperage | 17.92 Amps |
| Hrz | 60 Hrz, Single Phase |
| Max Fuse/Min Fuse | 20 Amps |
| Electrical Plug Type | L6-20 Twist Lock |
| Dimensions | 19 1/6" H x 21 1/4" W x 14 1/4" D |
| Pump Type | - Gas activated pump required for use with Bag-in-Box or other non-pressurized container |
| - No pump required for use with kegs | |
| Gas Type Used | CO2, Nitrogen or Compressed Air |
| Gas Pressure | - 18 psi with pump - 10 second pour |
| - 18 psi (Nitrogen) when pressurizing keg | |
| - 28 psi (nitrogen) running coffee through stout faucet with Screen | |
| Faucets | Stainless Steel Stout Faucets w/ optional screens |
| Standard Beer Faucets on request |
D200 Features
L6-20 Twist Lock Plug
The D200 Dispenser utilizes a 8 foot heavy duty 20 amp cable with a Molded L6-20 Twist Lock Plug.
Reversible Controls
Dispenser can be ordered with controls located on the front (standard) or back of the dispenser
John Guest Fittings
John Guest fittings can be specified on back or bottom of dispenser depending on installation location
Reservoir Filler Flap
Used to fill or top-off circulating water reservoir. A minimum of 8 inch clearance above dispenser is required.
Heavy Duty Power Switch
The lighted heavy duty 30 amp power switch is located in the lower left rear corner of the dispenser
Dispenser Configurations
The D 200 dispensers can be configured in multiple faucet configurations to meet your specific needs. While we are actively heating beverages with our dispensers, we are NOT actively chilling beverages. Like a beer tap, our cold faucets are pulling chilled beverages from a cooler box.
What's in the Box
Just add water, connect your product lines and start serving hot beverages. If you're starting from scratch, we can hook you up with everything you need or do the install for you.
Your dispenser is shipped with everything listed below.
- Heated Dispenser Unit
- 4 Adjustable Legs
- Faucets
- Black Faucet Handles
- Faucet Wrench
- John Guest Adapter
D200 Not What You're Looking For?
We offer different dispensers for different working situations. If the D200 isn't what you're looking for, please check out the rest of the D-Series heated dispensing units.
D100 - Lower Volume Heated Dispenser
48 Ounces a minute and utilizes standard 20 amp electrical power. Great for offices, food trucks, carts and shops.
D300 - High Volume Heated Dispenser
96 Ounces a minute and utilizes 220v 30 amp electrical power. Great for large, busy venues like stadiums and festivals.
Interested? Let's get in touch!
We can help bring your big hot beverage idea to life. Let your creativity loose and start serving the next hot thing!